QUAY INDOOR DINING CHAIR / FAQS

Owned by Mina Bassilious (Unlicensed)
Last updated: May 01, 2024 by Hussain Patwary
2 min read

 

A- No, the Quay Indoor Dining Chair is to only be used indoors as the interior frame has not been designed for outdoor conditions. 

 

A- No, the legs on the Quay Indoor Dining Chair cannot be removed. If your customer has damaged one leg you will need to order a replacement chair without cover and use the existing covers. 

 

A- No, the leg cap on the Quay Indoor Dining Chair is standard. If the customer chooses to have timber leg sleeves then this leg cap will be 3mm larger. 

 

Q- Can we order the Quay Indoor Dining Chair in outdoor fabric?  

A- Yes, the Quay Armless can be ordered in the outdoor fabric options but please advise the customer that it is still strictly an indoor chair as the chair frame is not suited to the outdoors.  

 

Q- Would a Quay Indoor dining chair on outdoor fabric have issues with mould?  

A- No, There are points of entry and exit for air on the chair. It shouldn’t get mouldy (we would have the same issue with our current outdoor upholstered chair if were to have problems). 

But in saying that it is worth noting that the backrest will be less comfortable than it would be with a normal fabric because the air movement would be reduced. 

 

Q- What is the part number of the Quay Dining Table leg cap?  

A- PN14051087 

 

Q- What is the measurement from the from the floor to the front arm height on the Quay dining chair. 

A- The front height is 655mm off the ground and back height is 695mm. 

 

 

 

Q- What colour leg is under the Quay dining chair timber leg sleeve?  

A- The chair leg is powder coat black. 

 

Q- Can you order the Quay timber leg sleeve unstained?  

A- Yes, this is available to order in SAP 

 

Q- What is the distance between the quay dining chair legs? 

A-  

 

  

Q- What is the weight Quay armless and Quay chair?

A- The weight capacity is 125kg.  

  

 

SPECIFICATIONS:

 

A- The powder coat colour on the Quay indoor leg is Ral9004 

 

A- Please see the attached instructions and note that the design has changed from two pins to one pin recently. 

 

ECN:

 

Two pins to one pin to secure the Quay Indoor Dining Chair seat to the frame