SMART TABLE CHARGING FAQs

Owned by Hussain Patwary
Last updated: Jan 12, 2024 by Chantelle Dunn
4 min read

SMART TABLE Troubleshooting

Problem: Mobile phone not charging.

Solutions:

  1. Please check that the device supports wireless charging. Refer ‘Device compatibility’

section below.

2. Ensure that the phone software is up to date with the latest software version. Please

update and restart your device to ensure updates are completed.

Sometimes if the device is not restarted, the software changes may not update.

  • IPhone 12 has been known to have this issue.

3. If the phone is still not charging. Move to Step 4 or Step 5

 

If the phone is not charging:

4. Does the red indicator light flash on when the table is plugged in?

  • The indicator light turns on only for 2 seconds when the table is first powered on.

This can help to locate the ideal spot on the surface for charging.

  • Keep the device on the table for at least 2 seconds for wireless charging to recognise

device.

  • Orient the phone vertically over the light which is generally better in locating the

charger on a larger surface area. The more central the device is on the table (above

the charging plate), the better.

5. If the indicator light does NOT flash on when you plug in table then the issue is likely

with the table or connection to power point.

  • The user can lift off the SMART table from the bracket and insert it back on the

bracket to see if it is sitting properly in the knock-in of the bracket. In the case of a

Jasper charge shelf, the user can turn the power on and off at the main switch and

see if the red indicator light flashes on.

  • Check all connection points to power supply.

  • NB* Remove phone cover/case as sometimes this may inhibit the charging function.

 

*If you have attempted all of the above and the issue is still not resolved, please contact

the Customer Service Department for a resolution.

 

Device Compatibility:

 

If the device is Qi enabled, these will be compatible with the charging tables.

 

Due to the frequent changes in tech, we don't have a compatibility list for all the devices

you can use on our charging tables and the user will need to obtain a charging accessory to

enable charging from another provider

 

Please note the position of the internal phone wireless coil location is different from phone to phone as shown below. For the best charging results the phones needs to be placed in alignment with the table charging location.

 

Miscellaneous

1. Speed of Charging:

The speed of wireless charging depends on the device compatibility.

Some phones support faster charging capability than others. King SMART tables

provide 15W of power (Orders placed after June 7th, 2021. Previous charge capability

was 5W.)

E.g.: Apple has 7.5W while some versions of Android can support the full 15W of

power.

  • Each device has a specification of compatibility: 5W, 10W, 15W - which refers to the

speed at which it can receive.

  • If the phone only has 5W capability, that is the speed at which it will charge.

  • NB* Apple have capped their maximum speed to 7.5W for non-apple wireless

chargers.

2. Some phones will not charge is they overheat. Please check that the device is not

overheating before placing on charger

 

Wireless Charging issues for iPhones 

For any customers experiencing wireless charging issues with the latest iPhone and iOS release, please follow the steps below, these steps are  

Please ensure the customer has:  

  • The latest iOS version 16.3.1. 

  • Completed a Force restart procedure below  

  • Removed any NON-Qi certified cases  

Update Your Device Software Update the iPhone to the latest iOS version:  

  1. Connect iPhone to Wi-Fi.  

  2. Open the Settings App.  

  3. Tap General.  

  4. Select Software Update. the latest version is iOS 16.3.1. Download and Install Software Update if the prompt appears.  

Force Restart iPhone After the iOS, update complete a force restart of the iPhone.  

  • Press and quickly release the Volume Up button.  

  • Press and quickly release the Volume Down button.  

  • Press and hold the Side button until the Apple logo appears on the display 

 

Another important note for iPhone 14 Pro specific models: 

Please note Apple are aware of the issue related to the thickness of the camera bezel can interfere with the wireless charging as the bezel doesn’t allow the phone to set completely flat, see the image below for reference: 

 

 Q: Is the iPhone 15 compatible with our charge tables?  

A: Yes, iPhone 8 and above are all compatible with our charge shelves 

Â