1977 / FAQS

The additional knock-ins in the mid-section of the 1977 Chaise have been added to allow easy accommodation of the Arm V2 module and are otherwise not required to be used.

Universal Plastic Joiner L330 - W55 (2 per module) is the joining solution for the 1977

Corner to corner: Holes A-G (Front legs) A-E (Back legs).

Corner to chair /chaise: Holes A-E

Chair/chaise to chair/chaise: Holes A – D or E, please note, only one joiner required for chaise at back.

PN: 12131323

Jasper Universal Leg Adjustable Standard (upto 120mm) PN: 12031306

Dream Leg Short Adjustable (upto 80mm) PN: 12032351

The 1977 sofa is achieved with five graduated comfort layers crafted from varying densities of CFC free high resilience foam and fibres. The seat composition is three layers of foam and two layers of lining material create a comfort engineered seat.

Chair -590mm

Chaise-1120mm

Corner-820mm

Curve-690mm

Two seater-590mm

Issue:

Some customers have reported sinking near the backrest of the chaise. This occurs because flex guards were removed from the design. The holes for the flex guards remain in the metal frame, allowing for their reinstallation if needed.

Step-by-Step Reinstallation Instructions

1. Obtain Parts

Obtain the 3 x 4" (100mm) springs and 3 x flex guards required for the reinstallation.

Picture

Part Number

Part Name

12134117

King flex guard

11061278

4" spring

2. Locate Holes on the Frame

Use the hole layout on the front of the frame as a reference, as the layout is mirrored on the back. These holes are used to attach the flex guards.

3. Install Flex Guards

Insert the 4" (100mm) springs into the designated holes at the backrest area of the frame.
Attach the flex guards over the springs, securing them tightly to ensure they provide the necessary support.

4. Tighten and Secure

Double-check that the springs and flex guards are securely in. Ensure that no components are loose.

Before and After Comparison:

Before:
Without the flex guards installed, the chaise may exhibit a sinking feeling near the backrest when pressure is applied.

Install:

After:
With the flex guards and springs reinstalled, the chaise should provide improved support and prevent sinking near the backrest.

Final Check

Ensure that all flex guards and springs are firmly in place and that the chaise feels sturdy. If any issues persist, contact CS for further support.

Chair / Chaise / Corner / Ottomans / 2 Seater: 4 Legs

Curve: 5 Legs